Toilet bowl spring clamp install tips needed...

[julie at menloparkrandd.com (julie@xxxxxxxxxxxxxxxxxx)]

A couple of spots of weld to stop it slipping might help as well. A handy tool under $10.00

>-----Original Message-----
>From: Spewey [mailto:spewey@xxxxxxxxxxx]
>Sent: Thursday, June 28, 2007 06:22 PM
>To: scirocco-l@xxxxxxxxxxxx
>Subject: Re: Toilet bowl spring clamp install tips needed...
>
>Mtl-Marc wrote:
>> Cool links, thanks for sharing them.
>
>Yay, I did something right finally!
>
>I should add a strong disclaimer that those clips will really fly if you 
>lose one under tension. As in bounce off the floor, then the bottom of 
>the car, and then the wall before coming to rest with either a wedge of 
>paint or eyeball on them. Please be very careful with improvised 
>methods especially installing.
>
>The muffler clamp is good but the nuts are hard to get to to turn. If 
>you make one, MkIMk, use your machine shop skills to make a longer one 
>from a threaded rod so the nuts are on the bottom and see if you can 
>weld retaining nibs on the bent (top) part without weakening it.
>
>Again, I'll mail you mine if you have the time to wait.
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@xxxxxxxxxxxx
>http://neubayern.net/mailman/listinfo/scirocco-l
>