Timing the ignition: TDC's

[rocco16 at sbcglobal.net (LEF)]

Remember, also, that there are TWO TDC's....one is right, and one is wrong if you are setting the dist up to #1.
I'm sure you can figure it out...

larry
sandiego16v
  > You should never have to "rewire" the cap.  There's a mark on the edge of
  > the distributor that indicates where the #1 wire/cap position should be.
  > Set up your cap so that the #1 wire is there, then install the distributor
  > (with the engine at TDC) so the rotor is pointing to this mark (very
  > important).