G60 Valve Cover

[peter at thescirocco.com (Peter)]

The 3A timing belt cover fits the G60 valvecover perfectly.
It comes on and off super easy, 2 snaps and you're done.

Peter

> -----Message d'origine-----
> De : Rick Kellner [mailto:rfkellner@snet.net] Envoy? : 16 janvier 2007 
> 07:15 ? : 'Scirocco list'
> Objet : RE: G60 Valve Cover
> 
> Marc, I put a G60 VC on my 84.  I was also installing a fox intake so 
> I wanted to put a larger throttle body on the car too.  I used a 16V 
> throttle body because the accelerator cable was mounted to the TB and 
> not to the valve cover.
> Next, I modified a stock timing belt cover by
> cutting off the top portion of the belt cover.   Basically the top
> semi-circle portion was removed.  I had all the pieces powder coated a 
> 'cast aluminum' color.  If you want some pictures just let me know and 
> I can send them along.
> Rick.
> 
> -----Original Message-----
> From: marc_scirocco@sympatico.ca [mailto:marc_scirocco@sympatico.ca]
> Sent: Monday, January 15, 2007 10:25 PM
> To: Scirocco list
> Subject: G60 Valve Cover
> 
> Thinking of buying a Corrado G60 Valve Cover.
> 
> I will also need the timing belt cover.
> 
> How is the fit of the new style top TB cover with the old style bottom 
> TB cover?
> 
> Any suggestion?
> 
> Cheers.
> 
> Marc
> 
>


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l