Undercoating made easier...

[johncworden at verizon.net (John C. Worden)]

On the recommendation from MkI Mark I tried a knotted wire wheel
on my grinder.  This works well but is tough on the hands and arms
(vibration).  It is also very dusty, but that doesn't really bother me.
The problem is the hard to get to areas.  I was checking out the
Eastwood Company catalog for some things and came across this:
http://www.eastwoodco.com/jump.jsp?itemID=1684&itemType=PRODUCT
I also read some reviews, some said it worked and others said it didn't.
So I bought a can and tried it out on the '78.  It doesn't work with one
spray, but with a few sprays and letting it sit a bit it actually works pretty
well.
Between this and the wire wheel, I've got the pass. front fender well, 
floor pan
and the over half of the spare well stripped of undercoating.  And yes, there
are little spots of rust here and there hiding under the coating-some not some
small either.



John C. Worden
Bucksport, Maine

''98 Dakota 4x4-
'86 Scirocco 8V-Now a 16V! Needs: finish the wiring
'78 Scirocco Brazil Brown Metallic, 4 speed.- In the Rotisserie
'89 Polaris Indy Deluxe



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.375 / Virus Database: 268.2.2/280 - Release Date: 3/13/06