Oil pressure switch

[desinor at sympatico.ca (Jean-Claude Desinor)]

   That sounds also like the infamous "Oil Pressure Warning System 
Control Unit".
   It manifests itself in two ways:
   - oil light comes on
   - warning buzzer in the instrument cluster buzzes.
   Mine started with the light.
   Then the light was flickering
   Eventually the buzzer started making noise.
   I clued on what was going on when I banged on the dash in 
exasperation, and the noise stopped.
   It was bad solder joints on the abovementioned Control Unit.
	
	Jean-Claude
	84 8V

julie@menloparkrandd.com a ?crit :
> Is this the famous "Cincy or Bust" Karl?
> There are 2 sensors. Higher and Lower pressure mounted on the oil filter flange. The temp is on the back of a 16v motor.
> Check the connectors on the switches. Its only tinned copper and it dows corrode. Check where the wire exits the plastic and connects to the connector.
> Have fun!
> 
> 
>>-----Original Message-----
>>From: silvius14@comcast.net [mailto:silvius14@comcast.net]
>>Sent: Thursday, June 8, 2006 08:44 PM
>>To: scirocco-l@scirocco.org
>>Subject: Oil pressure switch
>>
>>When I look in my engine compartment at the oil filter, which is the oil pressure switch. I see what looks like a sensor directly above the filter and one between it and the engine. The problem that I'm having is the oil warning light coming on. The oil level is fine and looks fairly clean on the dip stick.
>>
>>Any suggestions?
>>
>>Thanks,
>>Karl