MKII Door corner glass (triangle piece)

[amalventano1 at tds.net (Allyn)]

Remove roll-down window, remove 3 screws from forward window rail (bottom = 10
mm hex, behind panel / middle = 5mm allen, at base of glass / top = phillips,
under guide/seal in rail), window rail comes out, triangle piece slides aft with
its gasket as one assembly. It may be stubborn, but it will slide aft, just
support the glass from both sides and slide it.

It is one of the easier pieces to remove, as far as threat of breakage.

HTH
Al

> -----Original Message-----
> From: scirocco-l-bounces+amalventano1=tds.net@scirocco.org 
> [mailto:scirocco-l-bounces+amalventano1=tds.net@scirocco.org] 
> On Behalf Of calimus@techography.net
> Sent: Friday, January 06, 2006 10:04 AM
> To: Scirocco .org
> Subject: MKII Door corner glass (triangle piece)
> 
> Whats the best/easiest way to remove it without breaking it?  
> I have a parts car over at a friends house and it's time I 
> started breaking it down.  The windsheild is shot, but all 
> the rest of the glass is in good shape so I'd like to get it 
> all out and store it.
> 
> Thx,
> William S
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l