Scirocco-l Digest, Vol 12, Issue 50

[sciroccos at earthlink.net (Jim Ruffi)]

I drilled and EZ-outed quite a few, before I wised up and spent $8 on a hand
impact driver (the kind you use on motorcycles; you hit it with a hammer and
it rotates a bit).  Almost never fails.

Always replace the screws with new ones.

Jim


>Date: Sun, 12 Feb 2006 10:31:00 -0800
>From: Gordon Forbess <gforbess@attglobal.net>
>Subject: Re: Removal of Broken Front Disk Screw
>To: "David Utley" <fahrvergnugen@cox.net>
>Cc: Scirocco List <scirocco-l@scirocco.org>
>Message-ID: <ddvuu1hju2pbdluhpt4ktbuib5kujf620o@4ax.com>
>Content-Type: text/plain; charset=us-ascii
>
>On Sun, 12 Feb 2006 08:25:47 -0600, "David Utley"
<fahrvergnugen@cox.net> wrote:
>
>A very small chisel and a hammer....  Hit the chisel pointed at an angle in
>the direction of removal...
>
>Am I the only person here who actually has drilled and EZ-outed the
>things?  FWIW, the last pair of discs I put on wife's Benz came with
>new replacement screws in the box.
>
>Gordon
>75 Mk I/Drake 1.9
>http://pws.prserv.net/gforbess/scirocco/scirocco.htm