[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

master brake cylinder



Great write up!

I've found it easier to press the M/cyl assembly (with the bleeder hoses and
adapters feeding back into the reservoir), against my cedar garage wall,
otherwise the piston can easily get scratched, or gouged up.
 

Peter
http://thescirocco.com/

Drive the GTI, and save the Scirocco!

Please! Include the previous text in your reply...

-----Original Message-----
From: Timbo [mailto:timjmcconnell@gmail.com] 
Sent: Friday, April 07, 2006 3:16 PM
To: silvius14@comcast.net
Cc: scirocco-l@scirocco.org
Subject: Re: master brake cylinder

Patrick's G60 master cyl swap is here -
http://www.vintagewatercooleds.com/tech/Techtips/ATStechnotes/G60MC/G60MC.ht
m

--Timbo

On 4/7/06, silvius14@comcast.net <silvius14@comcast.net> wrote:
> Does anyone have any advice on how to replace the master brake cylinder?
Any suggestion on the best place to buy one?
>
> Thanks,
> Karl
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>


--
Timbo!
Location: Glenside, PA!
www.vintagewatercooleds.com/tech

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l