Motor mount and water pipe woes....

[sciroccos at earthlink.net (Jim Ruffi)]

Thanks for the tip.  I'll try that if I can't drive it out of there.

Jim

>-----Original Message-----
>From: Scourge [mailto:scourge@cogeco.ca]
>Sent: Tuesday, December 13, 2005 11:57 AM
>To: Jim Ruffi; Scirocco-L
>Subject: Re: Motor mount and water pipe woes....
>
>
>For the Motor Mount bolt.
>It's a little tricky, but you can get a sawzall blade in there and cut the
>bolt. You need to get the blade in the groove between the to parts of the
>mount on both sides(bolt head side, and caged nut side). Only catch with
>that method is that you need to replace the caged nut
>afterwards.(Don't for
>get to support the engine while doing this!!!
>Kind of hard to describe... hope ya know what I mean.
>
>HTH
>-George