[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Dyno day..

I think I'm the last one to set Greg's timing. Unfortunately, his flywheel had been put on wrong (by people unknown) so we had to establish TDC and I'm sure that's not 100% accurate. And it had been one hell of a long day.
But, his KS ignition was set in the 8-10 degree range.
Dan

From: "David Utley" <fahrvegnugen@cox.net>
Sent: Monday, August 15, 2005 10:14 AM

> Nice numbers, dude.  Glad to hear it was as high as it could have been...  Where did you have your ignition set?
> 
> David
>> 
>> From: Greg Pallett <greg.rocco@gmail.com>
>> Date: 2005/08/13 Sat PM 05:02:47 EDT
>> 
>> Well, the Dyno day numbers are in, and there was much rejoycing!
>> Max power and torque came on the 3rd run.
>> Max power = 108.5 @ 5600rpm
>> Max torque = 115.7 - and an amazing torque curve - more like a plateau! It 
>> hits max torque at about 2700 and stays there until over 4500! Already by 
>> 2000 it's pulling over 100 ft-lbs
>> And all these numbers came on a day where it was effing hot.. high 90's 
>> today!
>> I'm exhausted and dehydrated from driving w/o a/c
>> But still pretty pleased.
>> Cheers to all.
>>  Greg