[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sourced an Audi Oil Cooler



I did not think about the need for the extension through the sandwich
plate.  Will a flange from a unit with the water/oil cooler have the
extension?  Or does it have different plumbing to route the oil through
the cooler?
Thanks for the tip, Rick.
If not the flanges are also a few buck from EMPI.  

-----Original Message-----
From: T Berk [mailto:tberk@sbcglobal.net] 
Sent: Sunday, March 14, 2004 1:45 AM
To: rfkellner@snet.net
Cc: scirocco-l@scirocco.org
Subject: Re: Sourced an Audi Oil Cooler

rfkellner@snet.net wrote:

> That's the unit!  I have everything with the exception of the oil
filter
> flange.  I know that I can pick up a sandwich unit for about $15.
> I don't think anyone needs pics now that they have the diagram
however; if
> you still do, lmk.
> Thanks, Rick K.
> 
> 


PS- the Oil Filter Flange is a standard one, it just uses a longer 
threaded, hollow bolt up the middle to extend past the sandwich plate.

TBerk