Rant: Head Bolts

[ats at longcoeur.com (Patrick Bureau)]

And you used NEW headbolts right ?

ATS - Patrick Bureau -  85 2L, 102.5 whp, 121 ft/lbs torque
Email : ats@longcoeur.com - Web site : http://ats.longcoeur.com
AIM: texasscirocco - Yahoo: atsgtx - ICQ: 32918816 - MSN: atsgtx@hotmail.com
1975, 77, 78, 79, 80, 81S, 82 and 86 coming soon!

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Krazy Horse
Sent: Monday, January 26, 2004 2:29 AM
To: scirocco-l@scirocco.org
Subject: Rant: Head Bolts

So I pulled the head and replaced the broken exhaust studs, gaskets and did 
some clean up to the internal workings of the engine. All is going well, the

head is back on and its time to put the head bolts back in.

Look in the bentley for the torque specks and it says "44ft. lbs and 1/2 
turn (180 degrees)" Get out my torque wrench and st it for 44ft lbs. I 
proceed to torque all of the bolts; all is still well. I then start in on 
the 1/2 turn for the bolts. Of the 180 degrees that I have to tighten I get 
to about 176 and...

*SNAP*

Broke a f*cking bolt. I long string of profanity and I start to feel a 
little better, but still pretty pissed off. I tighten all the other bolts 
just fine. I know have the bolt in my hand taunting me, what a pisser.

Grrrrr...

-Craig
"Nightmare" '88 16v (PG-T Proj.)
"Calypso" '91 Golf GL (Daily Driver)

_________________________________________________________________
High-speed users-be more efficient online with the new MSN Premium Internet 
Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l