[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Hot Tank block and head?

Subject: Hot Tank block and head?
From: brian_wagner at sbcglobal.net (Brian Wagner)
Date: Fri Feb 20 21:24:14 2004
In-reply-to: <001101c3f807$941a0aa0$dff4fea9@kellnerhmypj1x>

Yes, but it is a cold tank> No I am not being funny either, because the
chemical used in a standard hot tank or Jet Wash is so caustic it will
damage the aluminum. The chemical in a cold tank is similar to carburetor
cleaner. Set in and soak.

Brian 

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Rick Kellner
Sent: Friday, February 20, 2004 5:17 PM
To: Scirocco-l@scirocco.org
Subject: Hot Tank block and head?

Last week there was some discussion regarding 'hot tanking' the block
prior to a rebuild, is a similar process used for the head prior to a
rebuild?
Thanks, Rick K.
 
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l

Follow-Ups:
- Hot Tank block and head?
  - From: mardak at cogeco.ca (Mark)

References:
- Hot Tank block and head?
  - From: rfkellner at snet.net (Rick Kellner)

Prev by Date: 16v running problem
Next by Date: Hot Tank block and head?
Previous by thread: Hot Tank block and head?
Next by thread: Hot Tank block and head?
Index(es):
- Date
- Thread