Part number request

[amalventano at sc.rr.com (Allyn)]

Steve,
first, the bushing housing is easily re-usable. i've got the old bushings
out with a simple vice rig:
http://scirocco.dhs.org/vw/pics/0-allyn/images/image122.htm
(and the next 5 images). re-installation of poly is VERY easy (i.e. by
hand).
second, i'll gladly front you an empty pair if you need (the twin doesnt
need a rear traling arm anyhow).
Al

Allyn Malventano, ETC(SS), USN
87 Rieger Scirocco GTO 2.0 16v (daily driver, 190k, rocco #6)
86 Kamei Twin 16V Turbo Scirocco GTX (30% complete, rocco #7)
86.5 Occo 16v Trailer (rocco #8)
90 Passat GL 16V (the wifes new daily, 200k)

----- Original Message ----- 
From: <Calawaymk2@aol.com>
To: <scirocco-l@scirocco.org>
Sent: Thursday, February 05, 2004 5:20 PM
Subject: Part number request


> I need the VW part number for the rear trailing arm housing that holds the
> rubber bushing.  This is the housing that the rubber bushing goes into.
TIA
>
>
> Steve Szuba
> Callaway Turbo Scirocco #10
> Uncle Rocco
> http://hometown.aol.com/calawaymk2/myhomepage/auto.html
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>