NOT how ammeters work,was Re: full thottle switch - how ammeters work

[jdbubb at ix.netcom.com (Dan Bubb)]

Patrick:
This topic has gone very far afield.
You need to measure DWELL!
It's nice to know the info in this thread, but it doesn't pertain to setting
the idle mixture in your (NOT CIS-E) car.
You need to have a dwell meter and set your mixture so dwell on the test
plug is 50%.
Dan



----- Original Message -----
From: Patrick Bureau <txrocco@sbcglobal.net>
To: T. Reed <treed2@u.washington.edu>; Allyn <amalventano@sc.rr.com>
Cc: L F <rocco16v@netzero.net>; <scirocco-l@scirocco.org>; ATS - Patrick
Bureau <txrocco@sbcglobal.net>
Sent: Monday, September 22, 2003 5:42 PM
Subject: Re: full thottle switch - how ammeters work


> alright you guys lost me a while by I hung in there just in case I would
get your wisdom and knowledge from reading your messages but alas I am
stumped again...
>
> in laments terms please
>
> I have a 2 plug connector and 2 leads from the multimeter... how is
putting those 2 leads into the plug be a problem ?
>
> and if it is not the proper way of doing it, what is ?
>
>