[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Swaping heads



It will bolt on, but the oil drain on the front of head is much bigger on
the JH and later heads. It has to welded up, redrilled to the smaller size
and the head resurfaced. Also, a hydraulic head would need to have the
bigger oil pump from a hydro engine to keep the lifters (and bearings)
happy.

Dan

----- Original Message -----
From: "Kervin Ridgley" <kridgley@brownscar.com>
To: "list" <scirocco-l@scirocco.org>
Sent: Wednesday, September 10, 2003 2:06 PM
Subject: Swaping heads


Will a JH head or a hydro CIS head bolt up and work on a EN block (1.7L)?
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l