[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
cv joints
At 08:20 PM 9/6/03 -0700, Dave Ewing wrote:
>The triple square is 6mm not 8mm. Audi and the starter bolts take the 8mm
>triple square.
>
>Dave
All of mine take the 8mm and unless the triplesquare starter bolts are smaller
than the allen wrench ones they should take 10mm. Now I'm going by what my
triple squares say on the side-M8 and M10; they do flare down on the end maybe
this is what you are talking about?
Not looking to start something here, but don't want the guy to buy the
wrong tool
either
John
- Follow-Ups:
- cv joints
- From: MK1Scirocco16v at comcast.net (Dave Ewing)
- References:
- cv joints
- From: sad_rocc at yahoo.com (Dan Smith)
- cv joints
- From: scirocco at powerlink.net (John C. Worden)
- cv joints
- From: MK1Scirocco16v at comcast.net (Dave Ewing)