12V ignition wire needed...

[amalventano at sc.rr.com (Allyn)]

use the coil power supply line.
Al

----- Original Message ----- 
From: "Ryan H" <rhock99@epix.net>
To: <scirocco-l@scirocco.org>
Sent: Friday, September 05, 2003 10:43 PM
Subject: 12V ignition wire needed...


> Installing an ignition system, and I need a 12V power supply wire that is
powered when the key is in RUN, as well as when CRANKING (reason I mention
is because some accessory wires shut off during cranking).  Anyone install
an ignition and have a good wire for this?  I'm thinking probably something
from the key ignition cylinder, but I have no idea which one and the Bentley
does my brain no good.  Thanks!!!
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l