Fw: Wide band O2 / megasquirt

[jdbubb at ix.netcom.com (Dan Bubb)]

Right! The narrow band plugs into the MS directly, the wide band sensor
plugs into a controller which then provides it's output to MS.
I really think you can do a good job of tuning the MS just using a narrow
band. If you were running a turbo where mixture becomes very important under
boost, then I would say WB-O2 was a necessity, but with NA I think an NB-O2
will get you 95%.
So, anybody have a wide band in your neck of the woods to eek out that last
couple % at WOT?
Dan

----- Original Message -----
From: Ron Pieper <rapieper@yahoo.com>
To: 'Dan Bubb' <jdbubb@ix.netcom.com>
Cc: <scirocco-l@scirocco.org>
Sent: Saturday, October 25, 2003 4:55 PM
Subject: RE: Fw: Wide band O2 / megasquirt


> > Most aftermarket engine management systems will interface directly with
> > a WB-O2 controller.
>
> OK...duh...I can use a WB O2 sensor w/ Megasquirt, but I need a controller
box just for the WB,
> right?
>
> Why am I so thick?
>
>
>
> __________________________________
> Do you Yahoo!?
> Exclusive Video Premiere - Britney Spears
> http://launch.yahoo.com/promos/britneyspears/