16V head-combustion chamber volume?

[jdbubb at ix.netcom.com (Dan Bubb)]

http://www.eurospecsport.com/cylheads.html
lists :
8V head @ 29cc
16V head @ 46cc
20V head @ 41cc

Dan



----- Original Message -----
From: "Drew MacPherson" <drew@scirocco.cs.uoguelph.ca>
To: <scirocco-l@scirocco.org>
Sent: Monday, October 20, 2003 12:35 PM
Subject: 16V head-combustion chamber volume?


>
> I understand that the 16V head has a greater combustion chamber volume in
> the cylinder head than the 8V engine (right?) which results in
> undesireable compression ratios when mixing and macthing 8V and 16V
> heads/blocks (ie. 8V head on 16V bottom end = high CR & detonation, 16V
> head on 8V block = undriveably low CR)
>
> Does anyone know how much of the chamber volume is in the head on the 16V?
> How close to the deck do 16V pistons come at TDC?
>
> Drew
>
> --
> /=============================================\
> |  84 Wolfsburg Edition TurboDiesel Scirocco  |
> |    http://scirocco.cs.uoguelph.ca/gtd       |
> \=============================================/
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l