Bolt size for Neuspeed 2-pt lower tie bar?

[jtoomasson at yahoo.com (Jeff Toomasson)]

This is not like the K-bar from the 16v. This one has ball-joints at the
ends that are easily greater than a 1/2" deep.

So I guess I should go with the 100mm version of the size Mr. Utility gave
(M12 X 1.5 X 90 mm)?

JT
----- Original Message ----- 
From: "Dave Ewing" <MK1Scirocco16v@comcast.net>
To: <scirocco-l@scirocco.org>
Sent: Friday, October 10, 2003 12:48 PM
Subject: Re: Bolt size for Neuspeed 2-pt lower tie bar?


> no need to be longer unless the bar is 1/4" or so thick.  If your worried
> about the amount of threads you'll be using or losing just take off the
> washer.
>
> Dave
> ----- Original Message ----- 
> From: "Jeff Toomasson" <jtoomasson@yahoo.com>
> To: "Patrick Bureau" <txrocco@sbcglobal.net>; <scirocco-l@scirocco.org>
> Sent: Friday, October 10, 2003 12:22 PM
> Subject: Re: Bolt size for Neuspeed 2-pt lower tie bar?
>
>
> > Yes - it is. I know you would need the same diameter and thread pattern,
I
> > just don't know how much longer it needs to be.
> >
> > Let me add I have none of these parts in front of me and happen to be
> > hitting PepBoys on the way home...
> >
> > thanks again, JT
> > ----- Original Message ----- 
> > From: "Patrick Bureau" <txrocco@sbcglobal.net>
> > To: "Jeff Toomasson" <jtoomasson@yahoo.com>; <scirocco-l@scirocco.org>
> > Sent: Friday, October 10, 2003 12:17 PM
> > Subject: Re: Bolt size for Neuspeed 2-pt lower tie bar?
> >
> >
> > > 2 pt lower tie bar, as in the one that attaches to your a-arm bolt
point
> ?
> > >
> > >
> > >
> > > Jeff Toomasson <jtoomasson@yahoo.com> wrote:
> > > Hi everyone - does anyone know off-hand what the bolt size is for
this?
> I
> > got a nice little hand-me-down from a local Vortexer.
> > >
> > > Thanks and hope everyone has a good weekend!
> > >
> > > JT
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > > ATS - Patrick Bureau - txrocco@sbcglobal.net
> > > '85 2.0L Prowler Orange, Kamei X1 Rocco
> > > '84 1.8L Silver Restoration and '83 Rocco Trailer Project
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l