160mph 8k tach gauge types

[MK1Scirocco16v at comcast.net (Dave Ewing)]

Wouldn't the circuit board from any speedo with the same gauges work for
yours??  Seems like if it matches up or has the same temp gauge then whether
or not it goes to 8k rpm or 160mph wouldn't make a difference.  I'm not sure
but seems like they would work.

Dave
----- Original Message ----- 
From: "Calimus" <calimus@techography.net>
To: "Jason" <jason@scirocco.org>
Cc: <scirocco-l@scirocco.org>; "Patrick Bureau" <txrocco@sbcglobal.net>
Sent: Wednesday, October 08, 2003 2:08 PM
Subject: Re: 160mph 8k tach gauge types


> I can agree, since I have one (88 16v that is).  On that note, I am
> putting out a call to anyone that might have a spare of that exact
> cluster (88-89 16v without the upshift indicator).  I don't care if the
> speedo works or not, basicly the printed circuit one mine is having a
> difficulty thats allowing my water temp gage to read incorrectly and the
> water low LED now flashes when I turn the headlights on (go figure).
> Everything else works fine, but and I've double checked just about every
> electrical system in the car to make sure there wern't other issues.
> This also includes replaceing the temp gage, replaceing the temp sensor,
> replacing the water pump and flushing the radiator and entire system.
>
> So if any of you have a spare 88 16v cluster and don't mind getting rid
> of it, please let me know.
>
> Thanks,
> William
>
> Jason wrote:
> >
> > Correct.  88 (and presumably '89) clusters did not have the upshift
> > indicator light.
> > Jason
> >
> > At 03:40 PM 10/8/2003, Patrick Bureau wrote:
> > >I think the one without the upshift light was 88-89 clusters on 16v. I
could
> > >be wrong.
> > >
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l