cross-flow vs g60

[txrocco at sbcglobal.net (Patrick Bureau)]

how about valve sizes?  I am considering this ITVB setup and I can use a JH
or a xflow head (depending if I want the flutes to be out back or in
front...but I have been trying to get intake/exhaust valve sizes, surely
someone has those numbers somewhere no ?

ATS - Patrick Bureau


->-----Original Message-----
->From: scirocco-l-bounces@scirocco.org
->[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Drew MacPherson
->Sent: Tuesday, November 04, 2003 6:27 AM
->To: Dan Smith
->Cc: Scirocco ML
->Subject: Re: cross-flow vs g60
->
->
->On Mon, 3 Nov 2003, Dan Smith wrote:
->
->> can be had for next to nothing. RD heads are found on late 80s GTIs and
->> I think Jetta GLs. They're hydro, slightly harder to come by and it's a
->
->HT = 85 GTI/GLI, RD = 86,87 GTI/GLI (actually, Jettas came with 'em part
->way through 88 as well)
->
->> good idea to run a knock sensor with it as compression is slightly
->> higher. I'm sure others with more experience in this area will chime in
->> as well.
->
->AFAIK the combustion chamber size is the same between the JH head and the
->HT/RD heads.  The difference in the compression ratio is in the pistons.
->
->>
->> Dan
->
->--
->/=============================================\
->|  84 Wolfsburg Edition TurboDiesel Scirocco  |
->|    http://scirocco.cs.uoguelph.ca/gtd       |
->\=============================================/
->
->
->_______________________________________________
->Scirocco-l mailing list
->Scirocco-l@scirocco.org
->http://neubayern.net/mailman/listinfo/scirocco-l