[TECH] Cis to CIS w/ Knock Box

[txrocco@sbcglobal.net (ATS - Patrick Bureau)]

thank you, one last question

the knock box runs wires from pin # 8  to full throttle (Blue/Black) and pin
#6 closed throttle (white/blue), I will try to dig the info out of Bentley,
but on the 85 rocco the wires to the throttle switch are brown/red and Grey
anyone know which corresponds to which?

ATS - Patrick Bureau - txrocco@sbcglobal.net


=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Dan Bubb
=>Sent: Tuesday, May 06, 2003 12:49 PM
=>To: ATS - Patrick Bureau; _Scirocco Mailing List
=>Subject: Re: [TECH] Cis to CIS w/ Knock Box
=>
=>
=>You remove the hall sender wires from the Ignition Module and "relocate"
=>them to the knock box.
=>The ignition control unit fires when it gets the signal.
=>With the original distributor with it's mechanical and vacuum advance the
=>hall sender sends the signal at the right time.
=>With the KS the knock box intercepts the signal from the hall
=>sender, waits
=>the appropriate amount of time (for correct advance) then sends the signal
=>to the ignition module.
=>Dan
=>http://neubayern.net/mailman/listinfo/scirocco-l