alternator casing

[2turbo at vwmail.net (tom skarda)]

 here's the problem i'm having. once i get the long screws out and open up the alternator, the bottom is still held in by screws from the inside. i can't pull the two halves far enough apart to get at these screws because i'll break the three wires that are solder there. is there a trick to this?

--- message from "L F" <rocco16v@netzero.net> attached:

_____________________________________________________________
Free email, forums and features for events, clubs and cars. Show Pride in Your Ride with a yourname@vwmail.net address from http://www.vwmail.net