removing motor mounts

[amalventano at sc.rr.com (Allyn)]

easy way to get them out:
take apart a hacksaw, reassemble with the blade through one of the holes in
the rubber.
saw ONLY THE INNER RING, minimizing how much you catch the outer ring. this
will take about 10 minutes. Once you make it through, the mount simply falls
out.
to get the new one in, you can use a GOOD (old, durable) vice, or a press, 6
ton minimum.
hth
Al

----- Original Message ----- 
From: "jasun deney" <2turbo@vwmail.net>
To: <scirocco-l@scirocco.org>
Sent: Sunday, June 15, 2003 4:44 PM
Subject: removing motor mounts


>   how do you get the old motor mounts out of the rings they are seated in?
> i found this one removing suspension bushings, could the same be done for
the motor mounts?
>
http://www.techography.net:82/brettsgarage/index.php?category=7&PHPSESSID=ef80e6e38dfb5cbd944abb23a495c715
>
>
> _____________________________________________________________
> Free email, forums and features for events, clubs and cars. Show Pride in
Your Ride with a yourname@vwmail.net address from http://www.vwmail.net
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l