[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

A little taste of what I'm cookin



Whoa, yeah, I'm interested in this too...how much is this going to end
up costing you for the hardware (i.e. not including the injection
setup)?

Joe

-----Original Message-----
From: Dan Bubb [mailto:jdbubb@ix.netcom.com] 
Sent: Thursday, July 10, 2003 6:58 AM
To: bbeacock@rogers.com; Scirocco. org Mailing List
Subject: Re: A little taste of what I'm cookin

Looks like a really cool inexpensive way to do ITB's!
Any plans for trumpets and air filters?
just curious.
Dan

----- Original Message ----- 
From: "Ben Beacock" <bennyb2k4@sympatico.ca>
To: "Scirocco. org Mailing List" <scirocco-l@scirocco.org>
Sent: Thursday, July 10, 2003 8:54 AM
Subject: RE: A little taste of what I'm cookin


> I just finished re-spacing the throttle bodies.  They were originally
> 80mm apart and need to be 88mm.  Next step is to fill a bit of the
lower
> manifold with weld to make a smooth transition then weld on the
flanges.
> The throttle bodies conveniently come with a rubber mount that
> transitions from a circle to an oval shape like the lower manifold but
> its slightly smaller.
> 
> Ben
> 81 Scirocco 2L16V EFI