Removing front motor mount

[roclist@accessconsulting.ca (Jason Adams)]

You'll have to use a jack to support/align the motor, sorry.

Normally you remove the two bolts from the starter, that hold the mounting
bracket to the motor.
don't forget to inspect for cracks while you're in there (Front cross
member)...

Jason Adams
Fahrvergnugen Forever! ;)
84 rocco 16v
93 320i
98 Z71

----- Original Message -----
From: "Efrain A. Olivares" <eojr@earthlink.net>
To: <scirocco-l@scirocco.org>
Sent: Friday, January 24, 2003 11:00 AM
Subject: Removing front motor mount


> I have broken front motor mount on my 16v and need to know if its possible
to remove it without jacking up the motor. It looks like its a standard bolt
on the bottom and a conical bolt on the top? Maybe my car had an
unsympathetic previous owner.
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>