tranny install problems??

[skerocdriver@juno.com (Shawn c Meze)]

On Wed, 26 Feb 2003 08:21:55 -0500 "Drew Teague" <roccnroll@hotmail.com>
writes:
>   One curious thing I came across, was 
> that after bench-pressing and bolting in the thing, I could lift the 
> clutch 
> lever with very little force.  Now, my experience is that I essentially

> should have to push pretty hard on the lever to get it to move the 
> whole way, if at all.  


Complete the cable instalation and see if there is a problem. I know that
the lever will lift up quite alot until it makes contact with the clutch
assy. Then its fairly stiff. You sure this isnt what your experiencing?


Shawn Méze
86' Jetta GLi 8V   88' Corvette -AS- #30  2002 SDR Solo2 Champion
Scirocco" 84' Scirocco 8V 82' Scirocco RIP 80' Scirocco S 79' "Project
FSP
The Fastest, Quickest, Cleanest and best looking Scirocco(s) in all of
San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm


________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com