[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Will a JH head bolt onto a passat 2.0 16V block.



Why would you want or need to change the pistons? the 16v bottom/8v t=
op
combination is a wonderful thing if you want over a 13:1 CR.
--
Scott F. Williams
NJ Scirocco nut
'99 Subaru Impreza 2.5 RS
Mazda 323 GTX turbo "assaulted" vehicle
Golf GTI 16v "rollycar"
ClubVAC: "Roads found. Drivers wanted."

-----Original Message-----
=46rom: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Marc Scirocco Qu=
=E9bec
Sent: Monday, February 03, 2003 7:43 PM
To: 'Scirocco-Al'; 'scirocco'
Subject: RE: Will a JH head bolt onto a passat 2.0 16V block.


It will bolt on. As this is exactly what I was planning of doing. But=
 you
need to change the pistons and the intermediate shaft for the motor t=
o run.
As well as some other minor details (plugging some holes).

Cheers.

Marc
'83 Scirocco
'88 Scirocco Slegato

-----Message d'origine-----
De : scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org]De la part de Scirocco-Al
Envoy=E9 : 3 f=E9vrier, 2003 19:33
=C0 : scirocco
Objet : Will a JH head bolt onto a passat 2.0 16V block.


I know it will make some insane compression ratio if it does, but it'=
s not a
driver.  Is it a bolt on application or will passages have to be plug=
ged or
moved?

Alan



_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l