[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

non-roc: help with replacing rear window in a rabbit



You wrap a small diameter rope around the outside of the gasket and set the
window in place with the ends of the rope on the inside of the car. Then you
pull the rope in working your way around the window so it pulls the
appropriate part of the gasket over the metal flange.
A little pulling and adjusting and patting of the whole window is needed as
you pull the gasket into place.
Don't push hard on any part of the window or you'll crack the glass,
especially the corners.
Once you have the gasket fully in place the window can generally be pushed
down a little further to fully seat the gasket.
HTH
Dan

----- Original Message -----
From: "Ryan Ruggles" <ryanruggles@uniserve.com>
To: <scirocco-l@scirocco.org>
Sent: Monday, August 25, 2003 3:32 PM
Subject: non-roc: help with replacing rear window in a rabbit


> I need help with replacing the rear window of my rabbit.  Do I just put
the
> seal on the window and push it in?
>
> Ryan
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l