tranny splines ?

[amalventano at sc.rr.com (Allyn)]

nope, hubs are the same

although there is some issue with some older hubs not accepting some newer
100mm half shafts (not due to splines, but due to the raised shoulder of the
outer cv hitting the hub carrier assembly).

hth
Al

----- Original Message ----- 
From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
Sent: Monday, August 25, 2003 1:49 PM
Subject: tranny splines ?


> one dumb question , on tehfront hubs of the wheels (where the cv half
shaft
> slide into and gets bolted to the front wheel hub) ths pline itself it is
> any different on a 90mm than on a 100mm ?
>
> I am asking because I may have a 9a and it would be replacing a 4K, and
> wanted to know if I need to find a car with hub that was 100mm shafts to
> replace the ones on my car currently.
>
> ATS - Patrick Bureau - txrocco@sbcglobal.net
> ----------------------------------------------
> MSN:ATSGTX@hotmail.com |YAHOO:ATSGTX@yahoo.com
> ICQ:32918816           |AIM:Texasscirocco
> ----------------------------------------------
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l