16V rear brakes

[t.piwonka at ttu.edu (Robert Piwonka)]

I use really big channel locks, so much easier.

Robert Piwonka
----- Original Message -----
From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
To: "Brad Sheridan" <brads@mindspring.com>; <scirocco-l@scirocco.org>
Sent: Wednesday, August 20, 2003 2:21 PM
Subject: RE: 16V rear brakes


> I used a C clamp myself ... without a problem
>
> ATS - Patrick Bureau - txrocco@sbcglobal.net
> ----------------------------------------------
> MSN:ATSGTX@hotmail.com |YAHOO:ATSGTX@yahoo.com
> ICQ:32918816           |AIM:Texasscirocco
> ----------------------------------------------
>
>
> =>-----Original Message-----
> =>From: scirocco-l-bounces@scirocco.org
> =>[mailto:scirocco-l-bounces@scirocco.org]On Behalf Of Brad Sheridan
> =>Sent: Wednesday, August 20, 2003 12:38 PM
> =>To: scirocco-l@scirocco.org
> =>Subject: 16V rear brakes
> =>
> =>
> =>
> =>  Is it a 12mm allen wrench that is needed to back the piston into the
> =>caliper on the rear disc brakes? It's been a while since the last time I
> =>did these.
> =>
> =>Thanks,
> =>Brad
> =>
> =>
> =>_______________________________________________
> =>Scirocco-l mailing list
> =>Scirocco-l@scirocco.org
> =>http://neubayern.net/mailman/listinfo/scirocco-l
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l