[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Regrind Cams (www.deltacam.com)



Allyn,

The cams were not at fault. They are in Rolling Roc and performing fine. The
seats were not cut at 90 degrees from the guides. Something like 91 or 92
degrees will definitely leak to the tone of 30 lbs compression.

Rick Alexander

----- Original Message -----
From: "Allyn" <amalventano@sc.rr.com>
To: "Brian McGarvey" <brianm@earendel.org>; <scirocco-l@scirocco.org>
Sent: Tuesday, April 15, 2003 1:51 AM
Subject: Re: Regrind Cams (www.deltacam.com)


> umm, just what was jacked up on that grm car head that caused the valves
to
> not seat?
> i would think the cams were ground improperly...
> Al
>
>
> > Notice that it is deltacam not cams.
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>