[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tach signal / knock sensor power increase?



Patrick, not sure which box you mean... the only two boxes I can find with 7 pins are the knock box and KE-Jetronic box...

> 
> From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
> Date: 2003/04/02 Wed AM 11:55:13 EST
> To: "Ryan H" <rhock99@epix.net>, 
> 	<scirocco-l@scirocco.org>
> Subject: RE: Tach signal / knock sensor power increase?
> 
> humm i though the TAch signal (rpm) was the pin 7 of the TZH box not the
> knock box.
> 
> ATS - Patrick Bureau - txrocco@sbcglobal.net
> 
> 
> =>-----Original Message-----
> =>From: scirocco-l-admin@scirocco.org
> =>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Ryan H
> =>Sent: Tuesday, April 01, 2003 11:20 PM
> =>To: scirocco-l@scirocco.org
> =>Subject: Tach signal / knock sensor power increase?
> =>
> =>
> =>OK guys, can someone tell me what wire to/from the knock box
> =>(16V) is the tach signal?  And also, look at this pic.... in the
> =>bottom right it says something about increasing power by
> =>unconnecting two grounds... um, anyone try this?  Where are they
> =>connected together?  At the harness connection?
> =>http://home.mindspring.com/~tberk/_uimages/Knock-Sensor-Diagram.JPG
> =>
> =>
> =>_______________________________________________
> =>Scirocco-l mailing list
> =>Scirocco-l@scirocco.org
> =>http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>