rear camber problems??

[PhillipB@BergenJaguar.com (Phillip Baloga)]

It's not too difficult to replace/or add a shim---The calipers/brakes, stub
axle, dust shield all need to be removed & then replace/add a shim. You
might want to replace the stub axle to start off with (that's probably the
cause of the problem) the stub axle is not that expensive either--new should
probably be in the range of $50.

-----Original Message-----
From: T Berk [mailto:tberk@mindspring.com] 
Sent: Friday, October 04, 2002 10:40 AM
To: Scirocco List
Subject: Re: rear camber problems??

Elijah R wrote:
> 
> ok, so there are shims in there, kewl. is this something i need to let my
> tire place re-shim or is it something i can do my self? I was thinking i
> maybe hit something that bent my stub axel, although if i hit something
that
> hard I know I would have wrecked a rim cuz I already tore one up in the
> front witha pot hole :(


There shouldn't BE any shims in there, stock doesn't come with any.

Most of what your talking about is fixed with new axle beam and/or hub
spindles.

You can shim if you like to correct a bent axle, if it's the spindle
just get a new one.

TBerk

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l