[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Nitrous Quesitons
--part1_3d.27a7e59e.2b075d34_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I have it on my 78, 8V. I don't have a plate because it would be too close
to the intake runners and you get an imbalance when "squeezing".
In regards to being safe, if it is tight, it should work. But then again, I
wouldn't use a plate on an 8V.
Questions? Fire away, I'll try to answer them.
-Dick-
78 Scirocco
Original Owner
http://members.aol.com/sailingfc/
WaspHwy@aol.com writes:
fucked. BUT... it does screw in tight, and points the right direction. just
to be safe, I wrapped it in teflon (the threads...) so, the question is, is
this safe to use?
also, I have some other general questions regarding nitrous use. so if
anybody out there has some experience with it on VW's, email me.
--part1_3d.27a7e59e.2b075d34_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">I have it on my 78, 8V. I don't have a plate because it would be too close to the intake runners and you get an imbalance when "squeezing".<BR>
In regards to being safe, if it is tight, it should work. But then again, I wouldn't use a plate on an 8V.<BR>
Questions? Fire away, I'll try to answer them.<BR>
<BR>
-Dick-<BR>
78 Scirocco<BR>
Original Owner<BR>
http://members.aol.com/sailingfc/<BR>
<BR>
<BR>
WaspHwy@aol.com writes:<BR>
<BR>
fucked. BUT... it does screw in tight, and points the right direction. just <BR>
to be safe, I wrapped it in teflon (the threads...) so, the question is, is <BR>
this safe to use? <BR>
<BR>
also, I have some other general questions regarding nitrous use. so if <BR>
anybody out there has some experience with it on VW's, email me.</FONT></HTML>
--part1_3d.27a7e59e.2b075d34_boundary--