[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
upper strut nut question...
- Subject: upper strut nut question...
- From: abatzis2@hotmail.com (Michael Abatzis)
- Date: Wed, 27 Mar 2002 22:24:49 +0000
i found that the special socket for an o2 sensor works pretty well. already
has the slats cut in the sides so you can grip it with a wrench, then put an
allen wrench through the middle. no probs. hth,
-michael
>From: Jason Jones <jnbjones@boulder.net>
>I am about to undertake my first strut replacement and am worried about
>being able to remove these nuts. Is it impossible to do without an
>impact wrench? Also, I was thinking it would be safer/easier to get
>leverage if I were to use the spring compressor with the strut still on
>the car and then once the nut is loosened remove the strut and proceed.
>Any issues with this? I don't have any kind of a vise to secure the
>strut if I attempt it with the strut removed. Also, would a shop be
>inclined to swap the cartridges for me even if I didn't purchase them
>from them and if so, what would be an appropriate charge?
>
>Thanks,
>Jason.
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com