[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

What were these LEDs for?



Al's right. They are purely ornamental.  They are just black plastic
'bumps', put there to visually 'balance' the functional LEDs.

----- Original Message -----
From: Allyn <amalventano1@comcast.net>
To: EUROROC II <flaatr@yahoo.com>; <scirocco-l@scirocco.org>
Sent: Tuesday, March 26, 2002 12:12 PM
Subject: Re: What were these LEDs for?


> raffi,
>     they were never used as far as i know, but they do come in handy in...
say... a twin engine
> rocco.
> Al
>
> ----- Original Message -----
> From: "EUROROC II" <flaatr@yahoo.com>
> To: <scirocco-l@scirocco.org>
> Sent: Tuesday, March 26, 2002 12:38 AM
> Subject: What were these LEDs for?
>
>
> > So here is a question for you all...
> >
> > Between the tach and speedo there are 5 LEDs for turn signals, battery,
> > oxygen sensor, oil pressure warning light (Jeff I got a funny story
about
> > this) and High beams... Which cars used the lower 5 and what were they
for?
> >
> > On my 8V i installed LEDs for fog lights, fan and A/C... I'm building a
new
> > set for my 16V with the MFA display and was curious about this before I
> > make the graphics (which I didn't do on the 8V).
> >
> > -Raffi
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>