Flowmaster muffler from TT...

[peter@thescirocco.com (The Scirocco)]

I use 2 ViseGrip chain tools, remove the clamps, 
spray PB Blaster at the joint, clamp down the chain 
tools and start twisting the pipes back and forth as 
you push them together.

HTH!

Peter - Bear Delaware 19701
'79 Scirocco 16V, '83 & '84 
GTI, '79, '81, '84, '84=BD, '88 Sciroccos 
http://thescirocco.com
Peloquin LSD
http://www.techtonicstuning.com
http://autotech.com
http://www.quaifeamerica.com
https://www.paypal.com/affil/pal=3DFRBJKL2G4Z76E

Check it out: http://feedbyte.com


---------- Original Message -------------------------
---------
From: Josh Hignight <Josh.Hignight@phoenix.edu>
Date: Wed, 20 Mar 2002 10:21:21 -0700

>I didn't ask because I found out that the pipes 
aren't pushed together far
>enough, so the whole exhaust isn't lined up 
properly. I'm going to TRY to
>play with it this weekend to get things lined up 
correctly. I'm getting some
>massively bad rubbing somewhere in front of the 
rear axle as well. 
>
>Any one got tips on how to get these pipes pushed 
together a bit more.
>They've been together for a while now (9 months). 
>
>I was thinking heat and hammer...
>
>Joshua Hignight
>Student Services/Technical Services
>New Mexico Campus
>(505) 821-4800