bolt kit numbers/pictures

[thescirocco@juno.com (Peter l lindvall)]

On Mon, 4 Mar 2002 07:42:19 -0600 (CST) <jester@westfailure.net> writes:
> Hi all,
> 
> There is a good industrail bolt store here in MO, and i am buying a
> quaife.
> 
> $30 for 10 or so high strenght bolts & nuts seems a bit high, has 
> anyone bought a bolt kit in the past that can measure them & report the

> numbers off the heads? anything unusual about the nuts?
> 
> these are probably off the shelf grade 10 or 12 metric fasteners, 
> probalby 50 cents to $1 a piece at a good bolt shop. Once that is known
a 
> bolt kit will be less than $10 rather than $30+.
> 
> The dealer part number might help too, then i can ask the dealer for 
> 1 bolt to compare. Then again, $30 isnt much compared to the cost of 
> a tranny rebuild, if the bolts actually were special ;)
> 
> thanks,
> 
> Steve

The bolt kit is indeed special, they have snap rings and locking shims.

Here's the part no. 171 498 088A...

"...using the finest of grade
materials. The bolts are made of A4340 cert. , nuts 4037 cert.
and lock plates ASTM A 366 cert., gaskets are the best of
material. All our parts meet and or exceed factory specs."

Peter 
thescirocco.com

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.