100MM axles into 90M hubs.

[amalventano1@comcast.net (Allyn)]

no, it wasnt specific, i think it happened some time in 86
Al

----- Original Message ----- 
From: "Dan Bubb" <jdbubb@ix.netcom.com>
To: "Dave Ewing" <rabbit16v@attbi.com>; "Scirocco List" <scirocco-l@scirocco.org>
Sent: Saturday, July 13, 2002 5:24 AM
Subject: Re: 100MM axles into 90M hubs.


> My 84 needed later hub carriers to install the 100mm axles. I'm thinking
> that (speaking just about Scirocco's) that if it didn't come with 100mm
> axles you should plan on having to change the hub carriers also.
> ETKA only shows two hub carriers with switch over at 53-E-012 218. Looks
> like the change over was not specific to the 16V.
> Dan
> 
> ----- Original Message -----
> From: Dave Ewing <rabbit16v@attbi.com>
> To: Scirocco List <scirocco-l@scirocco.org>
> Sent: Saturday, July 13, 2002 4:00 AM
> Subject: Re: 100MM axles into 90M hubs.
> 
> 
> > Depends.  Which year do you plan on doing this to?  I think 84 on are able
> > to take the 100mm axles, not positive but pretty sure.  I think Chris
> might
> > know!!
> >
> > Dave
> >
> > > Can you use 100MM axles in 90MM hubs? What has to be done to get them to
> > fit.
> > > Masun Dixon
> > > 78 Scirocco 16V
> > > 87 Scirocco 16V
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l