anyone willing to perform a crankshaft install for beer?

[jdbubb@ix.netcom.com (Dan Bubb)]

> 
> MORE IMPORTANT THOUGHT:
> Are there valve clearance problems when you put
> a 2.0L crank in a 1.8L engine?
> 
> Dan Miller
> --
> 
No, there are no valve clearance problems, but if you're putting a 2.0
crank in a 1.8 block you also need to replace the pistons or you will
have a head clearance problem with your 1.8 pistons.
You may also need to clearance the sides of the crankcase a little to
clear the rods with the longer stroke although I'm not positive on this.
Dan