[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Help! won't start after cam installation
This is a multi-part message in MIME format.
------=_NextPart_000_001A_01C1EEFB.7B593390
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: 7bit
yeah put the old ditributor back to see, if it starts the distributor you
got has a problem
-----Original Message-----
From: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Jeff Toomasson
Sent: Sunday, April 28, 2002 7:43 PM
To: scirocco-l@scirocco.org
Subject: Help! won't start after cam installation
Just completed installing my autotech cams and new distributor, but the
damn thing won't start.
Followed the directions to the letter, cam timing was on, engine timing
was on...made sure everything was re-connected (plug wires in 1342 order
CCW), but all it does it turn over. Rotating the distributor has no effect.
There was one tiny pop during the first crank, but then nothing...
It really seems that there's no spark at all or it's not being distributed
right. I don't know what to make of it. I'm 99% positive I assembled
everything properly. It was running fine before I started this, so i'm
reluctant to think it's the coil....
I may try the old distributor for the hell of it...
Any ideas? Thanks in advance! Jeff
----------------------------------------------------------------------------
--
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
------=_NextPart_000_001A_01C1EEFB.7B593390
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2715.400" name=3DGENERATOR></HEAD>
<BODY>
<DIV><SPAN class=3D560582602-29042002><FONT face=3DArial color=3D#0000ff =
size=3D2>yeah=20
put the old ditributor back to see, if it starts the distributor you got =
has a=20
problem</FONT></SPAN></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px =
solid">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B>=20
scirocco-l-admin@scirocco.org =
[mailto:scirocco-l-admin@scirocco.org]<B>On=20
Behalf Of </B>Jeff Toomasson<BR><B>Sent:</B> Sunday, April 28, 2002 =
7:43=20
PM<BR><B>To:</B> scirocco-l@scirocco.org<BR><B>Subject:</B> Help! =
won't start=20
after cam installation<BR><BR></FONT></DIV>
<P>Just completed installing my autotech cams and new distributor, but =
the=20
damn thing won't start.</P>
<P>Followed the directions to the letter, cam timing was on, engine =
timing was=20
on...made sure everything was re-connected (plug wires in 1342 order =
CCW), but=20
all it does it turn over. Rotating the distributor has no effect.</P>
<P>There was one tiny pop during the first crank, but then =
nothing...</P>
<P>It really seems that there's no spark at all or it's not being =
distributed=20
right. I don't know what to make of it. I'm 99% positive I=20
assembled everything properly. It was running fine before I =
started=20
this, so i'm reluctant to think it's the coil....</P>
<P>I may try the old distributor for the hell of it...</P>
<P>Any ideas? Thanks in advance! Jeff</P>
<P><BR>
<HR SIZE=3D1>
<B>Do You Yahoo!?</B><BR><A=20
href=3D"http://rd.yahoo.com/welcome/*http://health.yahoo.com";>Yahoo! =
Health</A>=20
- your guide to health and wellness</BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_001A_01C1EEFB.7B593390--