[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bilstein install help please



Tap the carrier with a small ballpeen hammer, all around, gently, about 300
times.  Use copious amounts of Liquid Wrench.  You can also use more heat
than you can imagine would be safe....

Larry  sandiego16V
----- Original Message -----
From: Rick Alexander <rick@brubakerbox.com>
To: <scirocco-l@scirocco.org>
Sent: Wednesday, April 17, 2002 4:21 PM
Subject: Bilstein install help please


> I'm refreshing the front of Rolling Roc ('87 16v). I'm installing Bilstein
> sport inserts and a 22mm sway bar. I've done this many times but I've
never
> had a strut cartridge refuse to come out of the carrier. The retaining nut
> is off. I've re-installed the spring in hopes that it will pull the insert
> out but no dice. I don't want to hit it much more for fear of bending the
> strut housing. I don't want to put heat on it for the obvious reasons. Do
> any of you have another trick to get the strut out?
>
> Rick Alexander
> http://www.brubakerbox.com
> http://clubs.hemmings.com/hams/
> http://clubs.hemmings.com/vwsrus/
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>