Bilstein install help please

[rick@brubakerbox.com (Rick Alexander)]

Indeed it will!

Apparently you and I are the only ones not feeding our faces right now.

Rick Alexander
http://www.brubakerbox.com
http://clubs.hemmings.com/hams/
http://clubs.hemmings.com/vwsrus/

----- Original Message -----
From: "Josh Hignight" <Josh.Hignight@phoenix.edu>
To: "'Rick Alexander'" <rick@brubakerbox.com>
Sent: Wednesday, April 17, 2002 7:59 PM
Subject: RE: Bilstein install help please


> JB weld will fill the hole...
>
> Joshua Hignight
> Student Services/Technical Services
> New Mexico Campus
> (505) 821-4800
>
> -----Original Message-----
> From: Rick Alexander [mailto:rick@brubakerbox.com]
> Sent: Wednesday, April 17, 2002 5:49 PM
> To: scirocco-l@scirocco.org
> Subject: Re: Bilstein install help please
>
> A hole in the bottom of the carrier might be just the ticket. I run the
risk
> of drilling the strut but it's going to the trash heap in any case. A hole
> in the carrier might let any moisture out, then again it might introduce
> moisture. Any one else ever try this?
>
> Rick Alexander
> http://www.brubakerbox.com
> http://clubs.hemmings.com/hams/
> http://clubs.hemmings.com/vwsrus/
>
> ----- Original Message -----
> From: "Josh Hignight" <Josh.Hignight@phoenix.edu>
> To: "'Rick Alexander'" <rick@brubakerbox.com>
> Sent: Wednesday, April 17, 2002 7:51 PM
> Subject: RE: Bilstein install help please
>
>
> > Oops, should have said BF-dead-blow-hammer :) I've been bad about
leaving
> > things out lately.
> >
> > I can see what you mean about heat, maybe a rosebud tip?
> > Have you tried squirting some liquid wrench type stuff in there somehow?
> > Maybe drill a small hole in the bottom of the housing (not the strut
> itself)
> > to relieve some pressure and have a place to try to tap at the back of
the
> > strut and squirt Liquid wrench...
> >
> > I dunno. Things I would do if I had to deal with that. Like I said
though,
> > I've never actually had to do that before.
> >
> > Joshua Hignight
> > Student Services/Technical Services
> > New Mexico Campus
> > (505) 821-4800
> >
> > -----Original Message-----
> > From: Rick Alexander [mailto:rick@brubakerbox.com]
> > Sent: Wednesday, April 17, 2002 5:35 PM
> > To: scirocco-l@scirocco.org
> > Subject: Re: Bilstein install help please
> >
> > Generally not a big job. The BFH might distort the strut housing which
> will
> > only compound my problem. Heat might be dangerous because I don't know
if
> > this strut is nitrogen charged or not. Even if it isn't it might boil
the
> > oil out of it and start a nasty fire. Worst case scenario I'll have to
get
> > another housing. Unfortunately I'm scheduled to AutoX this coming Sunday
> and
> > I don't want to miss the season opener.
> >
> > Rick Alexander
> > http://www.brubakerbox.com
> > http://clubs.hemmings.com/hams/
> > http://clubs.hemmings.com/vwsrus/
> >
> > ----- Original Message -----
> > From: "Josh Hignight" <Josh.Hignight@phoenix.edu>
> > To: "'Rick Alexander'" <rick@brubakerbox.com>
> > Sent: Wednesday, April 17, 2002 7:34 PM
> > Subject: RE: Bilstein install help please
> >
> >
> > > Heat and BFG are the only things I can think of. There's not a
screw/nut
> > on
> > > the bottom is there (lucky enough to have never done inserts myself).
> > >
> > > Joshua Hignight
> > > Student Services/Technical Services
> > > New Mexico Campus
> > > (505) 821-4800
> > >
> > > -----Original Message-----
> > > From: Rick Alexander [mailto:rick@brubakerbox.com]
> > > Sent: Wednesday, April 17, 2002 5:21 PM
> > > To: scirocco-l@scirocco.org
> > > Subject: Bilstein install help please
> > >
> > > I'm refreshing the front of Rolling Roc ('87 16v). I'm installing
> Bilstein
> > > sport inserts and a 22mm sway bar. I've done this many times but I've
> > never
> > > had a strut cartridge refuse to come out of the carrier. The retaining
> nut
> > > is off. I've re-installed the spring in hopes that it will pull the
> insert
> > > out but no dice. I don't want to hit it much more for fear of bending
> the
> > > strut housing. I don't want to put heat on it for the obvious reasons.
> Do
> > > any of you have another trick to get the strut out?
> > >
> > > Rick Alexander
> > > http://www.brubakerbox.com
> > > http://clubs.hemmings.com/hams/
> > > http://clubs.hemmings.com/vwsrus/
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>