[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Shifter bushing kit



No it's not the one that faces the firewall. This one faces the driver's
side fender.

-----Original Message-----
From: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org] On Behalf Of Rick Alexander
Sent: Monday, April 08, 2002 8:21 PM
To: scirocco-l@scirocco.org
Subject: Re: Shifter bushing kit


This one faces the firewall and it would be for the oil temp gauge.

Rick Alexander
http://www.brubakerbox.com
http://clubs.hemmings.com/hams/ http://clubs.hemmings.com/vwsrus/

----- Original Message ----- 
From: "Wes Brockway" <kywes@bellsouth.net>
To: <scirocco-l@scirocco.org>
Sent: Monday, April 08, 2002 2:57 PM
Subject: Shifter bushing kit


> I've gotten all bushings installed and things are a lot better however

> the ball of the shift lever has a lot of play to where it translates 
> to at least a .25" if not .5" variation underneath the car at the 
> reverse lock out rod (for want of a better description)My bushing set 
> came from the local VW dealership with the shift lever repair kit.
> 
> Question - Is there a better aftermarket kit (not counting short shift
> kits)
> 
> Other question - what fuel injection seal kit do you guys recommend 
> and are they available from our list supporters. I got a set again 
> from the local VW dealer and not all the seals fit my injectors.
> 
> Last question this post. - I'm preparing to camp out with the Bentley 
> for a while but maybe one of you guys will know immediately. In 
> checking out things I noticed yet another sensor on my cylinder head 
> with nothing attached to it. This one juts out in the same direction 
> as the distributor and is on the back side of the end of the head, 
> normally hidden by the distributor. For reference there is another 
> connector on the end of the head in front of the distributor, same 
> orientation, that has a flat connector. The one in back that I am 
> interested in has the button kind of connector. HTH
> 
> BTW I have an '87 16V Pl engine
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org 
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org http://neubayern.net/mailman/listinfo/scirocco-l