[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Tranny Question - one last time :)



Speaking for myself only, I don't know of any problems with them. They don't
suffer from the self-machining problem like some of the earlier 020s. In
fact, my Monster Rocc's tranny is half 4K and half ACN (in an ACN case).
______________________________
Scott F. Williams
Account Manager
GENUiTY - Eastern Region
100 Wall Street, 10th Floor
New York, NY 10005
Cell: 917.648.2256
Temporary Voice: 646.495.7961
scott.williams@genuity.com

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of Cory Langford
> Sent: Wednesday, September 26, 2001 10:28 AM
> To: Scirocco Listserv
> Subject: Tranny Question - one last time :)
>
>
>
> Anyone had any expereince with the ACN tranny?
>
> I have found a rebuild ACN quite cheap, so the question is to rebuild my
> FN, grind the case, etc for 100 mm (probabbly end up with a quaife) or
> go an get the ACN that is rebuild and have the Quaife installed a little
> later.
>
> What I want is a wide ratio tranny for the tubro project, and the ACN
> looks as wide as they get.  Any problems known with these trannies?
>
> TIA
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org