[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: While the valve cover is off, what else needs to be done?

To: Marc Peterson <mpeters6@rochester.rr.com>
Subject: Re: While the valve cover is off, what else needs to be done?
From: Gregory Davis <scirocco@iglou.com>
Date: Mon, 24 Sep 2001 14:48:13 -0400 (EDT)
cc: <scirocco-l@scirocco.org>
In-Reply-To: <003301c14525$0c649770$1b00a8c0@microworks.com>
Sender: owner-scirocco-l@scirocco.org

On Mon, 24 Sep 2001, Marc Peterson wrote:

> I just got another box of goodies from Mr Potter, (thanks!) and I'm going to
> be putting the oil deflector thingie in tonight.  While the valve cover is
> off, what else should I do.  Its a 1.7 solid lifter, so should I adjust the
> lifters?  My Bentley is at home, can someone give be quick rundown on this?
> I have the studs and the new valve cover gasket, so I'm good there.

Look in my Scirocco Tech Tips section for details/photo on valve
adjustment.

Greg
http://www.DriversFound.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- While the valve cover is off, what else needs to be done?
  - From: "Marc Peterson" <mpeters6@rochester.rr.com>

Prev by Date: {FS} - A/C Compressor
Next by Date: Question - Limited Slip?
Prev by thread: While the valve cover is off, what else needs to be done?
Next by thread: Re: While the valve cover is off, what else needs to be done?
Index(es):
- Date
- Thread