Re: easiest way to exhaust manifold?

["Dan Bubb" <jdbubb@ix.netcom.com>]

Laying on top of the engine and wrapping your arms around the manifolds is
another approach. If you're familiar enough with the hardware so you don't
need to see what your hands are doing this will keep shit out of your eyes
and give you a new access point.
Use lots of liquid wrench or equiv. The self locking nuts with the slits in
them can strip the threads right off the studs if they're dry. A six point
socket will also save alot of headaches.
Dan


----- Original Message -----
From: fryer <alienj@bad-candy.com>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, October 16, 2001 1:41 PM
Subject: easiest way to exhaust manifold?


> backround: stock 85 8v wolfs scirocco
> would it be easier to go from underneath to get the exhaust
> manifold off (what about lower front stress bar?), or should i
> just take off the intake 6 bolts right? anything else major
> involved in intake removal?
> thanks guys and gals
> chris fryer
>
> ________________________________________________________________
> Get your own evilemail.com address at http://www.evilemail.com
>
>
>
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org